Publish Time: 2022-10-26 Origin: Site
WD561 Is Being Used in Several Projects in China
for tunnels and mines with small cross sections
Wuxin Tunnel has lunched a new hydraulic face drilling rig for tunneling and mining development in cross sections between 4-21m².
Suitable for narrow vien mining
The machine minimum height is 1.6m which ideally suited for drifts or tunnels down to 1.9 meters in height. Equipped with articulated carrier and four-wheel drive, able to achieve flexible, fast and safe driving in the tunnel. Because of the short carrier, there is no need to disassemble the front and rear parts separately when the equipment goes down the shaft.
Economical and efficient
WD561 equipped with automatic drilling, automatic return and anti-jamming functions that increased the life-cycle of rock drill. Easy maintenance can effectively reduce the cost of use.
Intelligent and safe productivity
The digital recording of data such as the number and depth of holes allows for the real-time monitoring and evaluation of construction conditions, also equipped with automatic diagnosis and voice alarm system, which makes the operation more intelligent and safe.
Flexible and easy operation
The remote electric proportional hydraulic control system eliminated vision blind spots when drilling. Once the machine has finished drilling, the air system will automatically removes water and slag from the hole.
Now WD561 Is being used in several projects in China
Key Features
Coverage | 4-21m² |
Rock drill | 1838ME |
Diesel engine power | 66kW |
Length | 8000mm |
Width | 1300mm |
Height | 2000/2200mm |
Cross section (Max.) | 5.3m(W)×4.4m(H) |
Cross section (Min.) | 1.9m(W)×1.9m(H) |
Hole length | Up to 3400mm |
Total weight | 8.5t |
Turning radius | Min. 4m |
Gradeability | Max. 15° |