Five reasons for your selection of Uniroc concrete wet spraying machine
1.Equipped with the flexible manipulator, it has no dead angle but large working range in construction; its maximum forward spraying distance is 15.3m;
2.Designed with mechanical four-wheel drive and front wheel steering, it can drive powerfully with the maximum gradeability of 46%;
3.It is equipped with dual fuel and electric power system, of which the electric drive is used for normal construction and diesel fuel is used for emergency work in case of power failure.
4.It is designed with the optional air compressor with power of 75kW.
Technical parameters
Length | 7800mm |
Width | 2460mm |
Height | 3300mm |
Weight | 16000kg (without accelerator) |
Drive mode | Electric power system + Diesel emergency system |
Engine model | 4BTAA3.9-C125 |
Engine power | 93kW |
Rated power of motor | 65kW |
Pump cylinder direction, cylinder diameter | Longitudinal at rear endφ180mm |
Stroke of cylinder | 1000mm |
Jetting capacity | 30m³/h |
Diameter of conveying pipe | Φ125mm-φ80mm with reduced diameter |
Maximum particle size of aggregate | 16mm |
Concrete outlet pressure | 75bar |
Accelerator pump model | SED12 |
Drive mode | Four wheel drive |
Maximum pressure of accelerator | 20bar |
Theoretical maximum displacement of accelerator | 14.4L/min |
Capacity of accelerator tank | 1000L |
Chassis model | Engineering chassis developed by Wuxin |
Wheelbase | 4460mm |
Maximum travelling speed | 20km/h |
Minimum turning radius | Inner 1.9m and outer 5.9m |
Maximum gradeability | 46% |
Minimum ground clearance | 465mm |
Braking distance | 5m (20km/h) |